» boat http://www.castawaycustoms.com Wed, 19 Oct 2011 01:30:08 +0000 en hourly 1 http://wordpress.org/?v=3.2.1 Custom SeaDek on Older Lake and Bay http://www.castawaycustoms.com/2010/12/custom-seadek-on-older-lake-and-bay/ http://www.castawaycustoms.com/2010/12/custom-seadek-on-older-lake-and-bay/#comments Tue, 07 Dec 2010 19:56:25 +0000 admin http://www.castawaycustoms.com/?p=497 Recently completed a job for a customer who has a 1994 Lake and Bay.  The non-skid had been repainted once before, but it was starting to wear through in several different places and show its age.  While searching out the different options for marine traction and non-skid he stumbled across SeaDek.  Custom SeaDek was not only the option he was looking for, but also the solution to other problems.  Over time, boats that are used and fished hard like many of the Lake and Bay tend to show some age and small spider cracks are bound to happen no matter what brand or build of boat you have.  While you don’t want to cover over any structural issues, using SeaDek to cover small spider cracks seals them up and hides them giving the boat a nice new look.  This particular customer also fishes many tournaments and spends long days on the water.  The anti fatigue characteristics and cushion provided by adding SeaDek to your boat can really make those long days tournament fishing or just fun fishing more enjoyable.  We decide to go with a single color 5mm foam for this particular boat.  The storm gray is one of the more popular colors because it is fairly neutral ,so it goes well with most boats and being a little darker tends to hide dirt well.  One of the most frequent questions I get asked, and one asked by this particular customer was if the SeaDek gets hot.  Since SeaDek is a closed cell foam and fairly then it doesn’t retain heat.  What this means is when you first step on the pads if they have been sitting out baking in the sun you will notice they are warm, but not particularly warmer than any other deck and once you stand there for a second or two it disperses heat very quickly.  If you are interested in adding custom SeaDek to your skiff, bay boat, or offshore center console you can contact Castaway Customs at tyler@castawaycustoms.com.

Front deck showing its age

A nice clean new look

The rear deck before SeaDek

After adding Storm Gray SeaDek

Cockpit and gunnels need love too

SeaDek adding comfort and safety

Comfort while poling

]]> http://www.castawaycustoms.com/2010/12/custom-seadek-on-older-lake-and-bay/feed/ 0 Custom SeaDek on Ranger Banshee Extreme http://www.castawaycustoms.com/2010/03/custom-seadek-on-ranger-banshee-extreme/ http://www.castawaycustoms.com/2010/03/custom-seadek-on-ranger-banshee-extreme/#comments Tue, 09 Mar 2010 18:05:57 +0000 admin http://www.castawaycustoms.com/?p=280 I got a call the other day from Travis Tucker who runs a Ranger Banshee Extreme and fishes many redfish tournaments.  Travis had seen my custom SeaDek work on another boat and knew that is what he wanted on his boat.  We organized a time a place and place to meet up so I could scan the boat to make sure everything fit perfectly.  We completely covered the boat from the cockpit and decks to the poling platform and Yeti Cooler.  He will now have an easier time sneaking up on those spooky redfish in tournaments and also be nice and comfortable after a long day on the water.  Here are a few before and after shots, that really emphasize the difference that custom SeaDek can make to your skiff.  If you are interested in decking out your boat, big or small, give me shout at 321-537-2039 or shoot me an email at tyler@castawaycustoms.com.

This is a before shot of the front deck

This is an after shot of the front deck. The Ranger logo and ruler stick really set it off.

This is a before shot of the cockpit of the boat.

This is an after shot of the cockpit. We changed out the stock side gunnel pads to match the rest of the boat.

Before SeaDek on the Yeti Cooler and rear deck

After adding SeaDek to the Yeti Cooler and rear deck

]]> http://www.castawaycustoms.com/2010/03/custom-seadek-on-ranger-banshee-extreme/feed/ 0 Aluminum Billet Push Pole Holders http://www.castawaycustoms.com/2009/12/aluminum-billet-push-pole-holders/ http://www.castawaycustoms.com/2009/12/aluminum-billet-push-pole-holders/#comments Mon, 28 Dec 2009 02:27:43 +0000 admin http://www.castawaycustoms.com/?p=211 Castaway Customs now is carrying anodized aluminum push pole holders made by Renzetti.  They add a very nice look to your skiff and do a great job of holding your push pole.  Whether you are using a Stiffy push pole, Loop Tackle push pole, Biscayne push pole, Moonlighter push pole, or any other brand, they will work.  They are simple to install and light weight.  One of the pieces has a hole machined to put a bungee to make sure you push pole stays attached while running or driving down the highway.  They sell for the $170.00 and shipping is free.  Call 321-537-2039 today to order a set push pole holders for your boat.

Aluminum Billet Push Pole Holder Set

Another view of the push pole holders

Integrated Bungee Holder

]]> http://www.castawaycustoms.com/2009/12/aluminum-billet-push-pole-holders/feed/ 0 Redfish Die Cut Pads http://www.castawaycustoms.com/2009/12/redfish-die-cut-pads/ http://www.castawaycustoms.com/2009/12/redfish-die-cut-pads/#comments Mon, 21 Dec 2009 00:42:45 +0000 admin http://www.castawaycustoms.com/?p=187 Check out the new redfish die cut pads by Castaway Customs.  A simple yet versatile product that can used in many applications.  They work great as a fly holder, or to stick any lures or jigs in.  We have them in any of the colors of SeaDek.  They have the same peel and stick adhesive so you can use them anywhere.  They work great as a reel pad on the undergunnel of any boat or skiff.  They also look great so you can stick them anywhere as decoration.  It has the same great traction of SeaDek so you can use them as a trailer step pad or on any step for traction.  We will coming out with many other species shortly, so let us know what you would like and we will get started working on it.  To order a pair please contact me at tyler@castawaycustoms or feel free to give me a call at 321-537-2039.

Redfish Fly Holder

Redfish Trailer Step Pad

Redfish Die Cut Pad

Redfish Reel Pad

]]> http://www.castawaycustoms.com/2009/12/redfish-die-cut-pads/feed/ 0 What are the benefits of SeaDek? http://www.castawaycustoms.com/2009/12/what-are-the-benefits-of-seadek/ http://www.castawaycustoms.com/2009/12/what-are-the-benefits-of-seadek/#comments Tue, 01 Dec 2009 14:20:43 +0000 admin http://www.castawaycustoms.com/?p=39 This is a question I get asked almost daily.  For those who aren’t familiar with the product or have ever had it on a boat they want to know why they should put it on their boat.  Like the applications for SeaDek, the list of benefits also very vast.  I will cover a few of them, but the more the product is being used for different applications the more benefits we are discovering.

The main reason SeaDek was originally created was to provide a nonskid replacement for boats.  We put an embossed pattern we call micro dots into the pads which create a textured pattern.  The combination of this pattern with the foam provides an excellent nonskid surface.  You don’t have to worry about slipping and falling in your boat with SeaDek.  This will increase the safety or you and the guests on your boat making everyone’s boating experience more enjoyable.

Comfort, we are all looking comfort in everything we do in life.  From driving to sleeping, comfort is always a priority and we are seldom happy in an uncomfortable situation.  Why would a boat be any different?  With SeaDek is doesn’t have to be.  We provide a varitey of products in different thicknesses to suit the necessary comfort level for your boating experience.  If you are trolling offshore all day we can provide you a 15mm helm pad to stand on; if you are are crawling up onto the swim platform of your wakeboard boat we can provide you an 8mm swim platform pad to sit and kneel on; if you are poling around a flats boat all day we make poling platform pads.  No matter what type of boating you do SeaDek can make your boating experience more enjoyable.

For most people owning a boat is a luxury item.  Like all luxury items we like them to look good.  One thing I have learned about a boat is that if you take care of it, it will do the same for you.  SeaDek also makes your boat aesthetically pleasing.  The wide variety of colors and capabilities to provide logos really allows you to set your boat apart from the rest.  We all have a desire to be a little different and SeaDek is a great product to help you do that.

These are just a few of the advantages of adding the SeaDek product to your boat.  For more information browse around my website to see pictures  of different applications.  If you have any questions please feel free to contact me at tyler@castawaycustoms.com or call me at 321-537-2039.

Castaway Customs Flyer

]]> http://www.castawaycustoms.com/2009/12/what-are-the-benefits-of-seadek/feed/ 0 Custom Logos http://www.castawaycustoms.com/2009/12/custom-logos/ http://www.castawaycustoms.com/2009/12/custom-logos/#comments Tue, 01 Dec 2009 14:08:36 +0000 admin http://www.castawaycustoms.com/?p=158 Castaway Customs specializes in making custom products that help set your boat apart from the rest.  If you already have artwork provided or have a concept you can email to us.  We have many semi custom logos to choose from and have the abilities to create any custom logo whether it be for strictly for your SeaDek pad or if you want new boat lettering.  Castaway Customs works in close relation with BoldWater who has been a staple for design work in the marine industry for over 10 years.  Check out a few of the recent logos we have done recently.  If you would like to purchase a pad with a stock or custom logo, please contact us at tyler@castawaycustoms.com.

Photobucket

Custom Marlin Logo designed by BoldWater

Photobucket

Custom Redfish and Trout Logos

]]> http://www.castawaycustoms.com/2009/12/custom-logos/feed/ 0 SeaDek Helm Pads http://www.castawaycustoms.com/2009/11/seadek-helm-pads/ http://www.castawaycustoms.com/2009/11/seadek-helm-pads/#comments Wed, 25 Nov 2009 14:37:56 +0000 admin http://www.castawaycustoms.com/?p=23 SeaDek helm pads are designed to provide you a comforting time on the water.  Helm pads vary in thickness depending upon your application and needs.  Stock helm pads are 15mm thick, but we make them in a wide variety of thicknesses also.  We also offer our pads in a wide varitey of colors so you will be able to find something that looks great at the helm of your boat.  While we sell stock SeaDek helm pads on our webstore, we also specialize in custom SeaDek helm pads.  So if you don’t see a size that fits your boat or just want a custom logo contact us and we will get you all taken care of.  We specialize is custom logos and design so if you just want one of our stock fish designs, the name of your fishing team, or name of your boat that is not a problem at all.  Shoot me an email at tyler@castawaycustoms.com or feel free to give me a call at 321-537-2039 for more information.

Photobucket

Stock SeaDek Small Helm Pad

Photobucket

Custom 33' Hydrasport Helm Pad

Custom Logo for Surfari Charters

]]> http://www.castawaycustoms.com/2009/11/seadek-helm-pads/feed/ 0 What is SeaDek? http://www.castawaycustoms.com/2009/11/what-is-seadek-2/ http://www.castawaycustoms.com/2009/11/what-is-seadek-2/#comments Tue, 24 Nov 2009 23:09:09 +0000 admin http://www.castawaycustoms.com/?p=19 SeaDek is a closed cell EVA foam formulated for marine environment.  It is made using UV inhibitors to protect against fading and shrinkage.  SeaDek is also manufactured in the USA in Rockledge, FL.  SeaDek is designed to provide excellent traction when wet as well as provide cushioning for those long days on the water.  No matter what type of boat you own or run there is a SeaDek product to meet your needs.  From custom designed products to stock sheet material we have you covered.  The best part of the SeaDek product is the ease of application.  All SeaDek products have an easy peel and stick adhesive so you don’t have the hassle of messy glue.  Take a look around our website for more info and pictures of the different products.

]]> http://www.castawaycustoms.com/2009/11/what-is-seadek-2/feed/ 0