» 2010 » April

Custom SeaDek Coaming Bolster Pads

I recently did a job for Capt. Chris Walter of Get Bent Sportfishing out of Hawks Cay Marina in Duck Key Florida. Chris restored an older 23′ SeaCraft and had some customers complaining about needing bolster pads while fighting fish so your thighs and legs don’t hurt at the end of a long day on the water. Chris contacted me and wanted to get some custom SeaDek coaming bolster pads designed so I had him pull some basic measurements off of the boat and I cut and shipped the pads down to him. With the easy peel and stick application, it makes applying the pads very simple. You don’t have to worry about drilling any holes in the boat at all. If you are interested in getting a set of custom coaming bolster pads made for your boat contact Castaway Customs at 321-537-2039 or shoot me an email to tyler@castawaycustoms.com.

A beautiful classic SeaCraft

A view of the coaming pads looking aft

The thinner coaming pads around the bow

The full 360 degree bolsters look great on the boat

Make sure to give Chris a call to go fishing

Tags: castaway customs, coaming bolster, get bent sportfishing, hawks cay marina, peel and stick, seacraft, seadeck, SeaDek

Boat Cushion, Bolster Pads, Custom SeaDek, Offshore Boats, SeaDek, Sportfishing Boats | admin | April 14, 2010 4:00 pm | Comments (0)

Luhrs 28 Open Custom SeaDek

I met Capt. Steven Tejera of Knot Tight Charters a while ago while traveling throughout South Florida working. Steven is a young captain who is passionate about fishing and knows the waters of South Florida and the Keys offshore and inshore. This is the offshore boat he runs and wanted to make the boat a little more comfortable for those long days on the water. He primarily uses the boat for sailfishing so we had Boldwater create us a custom sailfish logo for the boat. The custom logos are a nice way to make your boat a little different from the next. Castaway Customs can add boat names, fish designs, or almost any logos to your pads. Capt. Steven was extremely happy with the job and will be doing the upper station on the boat soon so stay tuned for updates. If you would like to add custom SeaDek to your boat contact Castaway Customs at 321-537-2039 or send me an email at tyler@castawaycustoms.com.

A shot before I installed the custom SeaDek to the floor

A shot after the custom floor pads were installed

Another angle of the custom pads

A closer look to show the detail of the logo

Tags: BoldWater, castaway customs, custom logo, Custom SeaDek, fishing, knot tight charters, luers boats, offshore boat, sailfish, sailfishing, seadeck, SeaDek

Boat Cushion, Custom Marine Art, Custom SeaDek, Offshore Boats, SeaDek, SeaDek Floor Kits, Sportfishing Boats | admin | April 9, 2010 10:42 pm | Comments (0)

Carver Yacht Faux Teak SeaDek

I got a call recently from a gentlemen who was fed up with the snap in carpet in his Carver Yacht holding dirt and water. He gave me a call and made an appointment to meet up and have me digitize his boat. Within about an hour I scanned the cockpit, fly bridge, and step areas on the boat. The boat owner had gone with real teak decking on his last boat and while he liked the look he hated the maintenance that came along with it. After scanning the boat I went over a few different layouts of how we could design the teak. Some customers like the planking to run all the way to the edge of the pad while other like to have everything bordered out. In this instance, the owner wanted to go with the borders and we used the existing non-skid pattern molded into the deck for a pattern to follow. This allows water to drain and looks very clean. After working out all the details I swung by and installed the SeaDek, the owner was out of town at the time, but amazed out how nicely everything came out. If you are interested in having faux teak SeaDek designed for your boat contact Castaway Customs at 321-537-2039 or you can email me directly at tyler@castawaycustoms.com.